AMSOIL Saber™ Synthetic 100:1 Pre-Mix 2-Cycle Oil
Saber Professional (ATP) is specifically designed for small engines including, but not limited to, chain saws, lawn equipment, blowers, chop saws, pumps, scooters and go-carts. It is available in a 3.5- oz. bilingual (English/Spanish) container which is ideal for treating the 2 – 2.5-gallon cans of gas commonly used for storing mixed gas on the job. Saber Professional also works well in motorcycles, snowmobiles, ATVs, jet boats and personal watercraft.
Saber Professional is formulated with high-temperature detergent additives to help prevent hard carbon deposits from forming in these hot-operating motors. Saber Professional is “smokeless” and delivers fewer emissions at 100:1 mix ratios than oils mixed at 50:1. Equipment operators subjected to smoke and fumes will benefit from these low emission properties. Because one mix ratio satisfies multiple pieces of equipment, Saber Professional eliminates mix ratio confusion. Saber Professional is recommended for pre-mix where ISO-L-EGD, JASO FD or API TC is specified.
Applications (2-Cycle Recommendations Chart)
AMSOIL Saber 100:1 2-Cycle Oil is recommended for 100:1 mix ratios in normal service. Richer mix ratios may be used where desired.
| 2.6 oz. | per 1 U.S. gallon | 50:1 |
| 8 oz. | per 5 U.S. gallons | 80:1 |
| 1.3 oz. | per 1 U.S. gallon | 100:1 |
| 8 oz. | per 6 U.S. gallons | 100:1 |
|
TYPICAL TECHNICAL PROPERTIES
Saber™ Professional Synthetic 100:1 Pre-Mix 2-Cycle Oil (ATP) |
|
|
Kinematic Viscosity @ 100°C, cSt (ASTM D-445) |
13.5 |
|
Kinematic Viscosity @ 40°C, cSt (ASTM D-445) |
99 |
|
Viscosity Index (ASTM D-2270)
|
136 |
|
Pour Point °C (°F) (ASTM D-97) |
-36 (-33) |
|
Flash Point °C (°F) (ASTM D-92) |
114 (237) |
|
Fire Point °C (°F) (ASTM D-92)
|
114 (237) |
|
DANGER: harmful or fatal if swallowed. Contains synthetic lubricant and petroleum distillates. If swallowed do not induce vomiting. Contact a physician immediately. Keep away from fire, heat and open flame. Use with adequate ventilation. Avoid frequent or prolonged skin contact. Flush eyes with water for 15 minutes in case of contact. KEEP OUT OF REACH OF CHILDREN.
|
|
